Launch offer — valid today only

📄 Digital book in PDF · read it on your phone or print it

The Steamfitter-Pipefitter Interprovincial Exam in Drawings: Isos, Offsets and Steam You Can Picture One Topic on Every Page

Isometrics, offsets in millimetres, rolling offsets, valves in cutaway, steam traps, hydronic loops, flange bolt-up and pressure testing. Every topic has its own page: the drawing first, then what you need to remember. 65 illustrated pages.

START STUDYING THIS WAY

🔒 Secure checkout · PDF by email · 30-day guarantee

Every topic, its own pageEach offset, valve and loop drawn, with the explanation beside it
65 illustrated pages9 parts, from what the exam covers to the week-before review plan
Up-to-date sourcesRed Seal Occupational Standard, CSA B51 and ASME B31.1/B31.3
PDF by emailFormat

Look Inside the Book

Every page has one big drawing and a box with the numbers and steps you need to know:

130 questions, pass mark 70%: B 22%, E 21% and D 18% carry most of the exam.
130 questions, pass mark 70%: B 22%, E 21% and D 18% carry most of the exam.
NPS 4 = DN 100 = 114.3 mm OD; from NPS 14 up, OD equals the size
NPS 4 = DN 100 = 114.3 mm OD; from NPS 14 up, OD equals the size
North arrow, flow arrow and slope arrow: lines on the 30° axes are horizontal
North arrow, flow arrow and slope arrow: lines on the 30° axes are horizontal
√(400² + 300²) = 500 mm: the diagonal of the offset box.
√(400² + 300²) = 500 mm: the diagonal of the offset box.
Gate valve: fully open or fully closed, rising vs non-rising stem drawn side by side
Gate valve: fully open or fully closed, rising vs non-rising stem drawn side by side
419 kJ to heat 1 kg of water to 100 °C, 2257 kJ more to boil it
419 kJ to heat 1 kg of water to 100 °C, 2257 kJ more to boil it
50 kW at 11 °C ΔT needs about 1.08 L/s: the formula worked on one page
50 kW at 11 °C ΔT needs about 1.08 L/s: the formula worked on one page
Hydro test: 1.5 × design pressure, held at least 10 minutes, every joint inspected
Hydro test: 1.5 × design pressure, held at least 10 minutes, every joint inspected

Swipe to see more →

These are real pages from the book. The table of contents is the full one: 9 parts and 61 topics.

The Problem Isn't You. It's How It Was Explained to You.

You're on an exam question with a plan view and an elevation of the same run, and four isos to pick from. On site you'd read it in a second. Here, the three views won't line up in your head.

The module describes it in paragraphs: projection, planes, axes, hidden lines. Nobody can picture a pipe run from a paragraph, and by the next night it's gone.

North arrow, flow arrow and slope arrow: lines on the 30° axes are horizontal

In this book, that topic is one page: the same run drawn three times, plan, elevation and iso, side by side. The vertical axis and the two 30° axes are marked, so you see where every elbow goes.

Every other topic gets the same page: NPS and DN, set-run-travel, the gate valve in cutaway, the trap station, the hydro test. One topic, one drawing.

Now you look at the plan and the elevation and you build the iso yourself, without going back to the module.

COMPARE FOR YOURSELF

The Same Topic, Two Ways to Study It

THIS
  • The manual: line after line of text
  • Pipe sizes, offsets and valves explained only in words
  • You walk into the exam still unsure
Nominal Pipe Size (NPS) is a dimensionless designator that does not correspond to any measured dimension of the pipe. For sizes NPS 1/8 through NPS 12, the outside diameter is fixed for each nominal size and differs from the nominal value, while the inside diameter varies with the wall thickness set by the schedule. For NPS 14 and larger, the outside diameter in inches equals the nominal size. The metric designator DN corresponds approximately to NPS multiplied by 25; thus NPS 4 is DN 100, with an outside diameter of 114.3 mm.
FOR THIS
  • Pipe size drawn with its real OD
  • The numbers in one box
  • You see it and it makes sense
NPS 4 = DN 100 = 114.3 mm OD; from NPS 14 up, OD equals the size
CONTENTS

Take a Look at the 9 Parts and 61 Topics

Before you start, pipe and joining, drawings and isos, pipe math in millimetres, valves, steam, hydronics and other systems, testing and safe work, and the final review: 65 pages, all illustrated

IBefore You Start · pp. 5-8
  1. What the Interprovincial Exam Actually Covers
  2. Challenging as a Trade Qualifier
  3. How to Read a Page in This Book
  4. How Multiple-Choice Questions Are Built
IIPipe, Fittings and Joining · pp. 9-16
  1. NPS and DN: Why 4-Inch Pipe Isn't 4 Inches
  2. Pipe Schedules and Wall Thickness
  3. Pipe Materials at a Glance
  4. Copper Tube Types K, L and M
  5. Butt-Weld Fittings and Their Take-Outs
  6. Threaded Joints: NPT Engagement
  7. Socket Weld vs Butt Weld
  8. Grooved, Flanged and Brazed Joints
IIIDrawings and Isometrics · pp. 17-23
  1. Plan, Elevation and Isometric Views
  2. Iso Symbols You Must Know
  3. The North Arrow and Flow Direction
  4. Showing Offsets on an Iso
  5. Dimensions: Centre to Centre, Face to Face
  6. Line Numbers and the Bill of Materials
  7. Sketching Your Own Iso
IVPipe Math in Millimetres · pp. 24-32
  1. Offset Vocabulary: Set, Run, Travel
  2. The Offset Constants Table
  3. Simple 45° Offset, Worked
  4. 60° and 22.5° Offsets, Worked
  5. Rolling Offset: Finding the True Offset
  6. Rolling Offset: Travel and Run
  7. Equal-Spread Parallel Offsets
  8. Pipe Expansion
  9. Metric and Imperial Conversions on Site
VValves · pp. 33-39
  1. Gate Valve in Cutaway
  2. Globe Valve in Cutaway
  3. Ball, Plug and Butterfly Valves
  4. Check Valves
  5. Pressure Relief and Safety Valves
  6. Pressure-Reducing Valves and Stations
  7. Control Valves and Actuators
VISteam Systems · pp. 40-47
  1. Steam Basics: Sensible and Latent Heat
  2. Low-Pressure vs High-Pressure Boilers
  3. Boiler Trim
  4. Steam Main Layout and Drip Legs
  5. Steam Traps: Which Type Where
  6. Trap Station Piping
  7. Condensate Return and Flash Steam
  8. Water Hammer: Causes and Fixes
VIIHydronic and Other Systems · pp. 48-53
  1. Closed-Loop Hydronic Basics
  2. Pumping Away and the Point of No Pressure Change
  3. Primary-Secondary Piping
  4. Chilled Water and Cooling Towers
  5. Natural Gas and Propane Piping
  6. Compressed Air and Process Lines
VIIITesting, Bolt-Up and Safe Work · pp. 54-60
  1. Hydrostatic Test, Step by Step
  2. Pneumatic Test and Why It's Dangerous
  3. Flange Faces and Gaskets
  4. Flange Bolt-Up Pattern
  5. Pipe Supports, Guides and Anchors
  6. Rigging and Sling Angles
  7. Lockout, Confined Space and Hot Work
IXFinal Review · pp. 61-65
  1. Formulas on One Page
  2. The Most Common Exam Mistakes
  3. The Most Common Site Mistakes
  4. What to Verify for Your Province
  5. The Week-Before Review Plan

One Page, One Topic, All Clear

Think of it this way:

You're on the exam with a rolling offset: 450 mm set, 300 mm roll, 45° fittings. No phone, no partner, no app.

The night before, you open the rolling offset page and see the box drawn in 3D: set and roll on the sides, the true offset as the diagonal, then travel = true offset × 1.414 at 45°, worked in millimetres. On exam day, you picture that box and work the numbers.

Gate valve: fully open or fully closed, rising vs non-rising stem drawn side by side

Same with the gate valve in cutaway, the trap station, the closed hydronic loop, the flange bolt-up pattern and the hydro test: each one on its own page.

Steamfitter-Pipefitter Illustrated is 9 parts and 61 topics, all drawn, with the formulas on one page, the most common mistakes and a week-before review plan at the end.

What you see drawn, you don't have to memorize.

What's Inside Steamfitter-Pipefitter Illustrated:

Ipp. 5-8

Before You Start

What the Interprovincial exam covers, challenging as a trade qualifier, how to read each page and how multiple-choice questions are built

IIpp. 9-16

Pipe, Fittings and Joining

NPS and DN, schedules and wall thickness, pipe materials, copper types K, L and M, butt-weld take-outs, NPT engagement, socket vs butt weld, grooved, flanged and brazed joints

IIIpp. 17-23

Drawings and Isometrics

Plan, elevation and iso views, iso symbols, north arrow and flow, offsets on an iso, dimensions, line numbers and the bill of materials, sketching your own iso

IVpp. 24-32

Pipe Math in Millimetres

Set, run and travel, the constants table, 45°, 60° and 22.5° offsets worked in millimetres, rolling offsets, equal-spread offsets, pipe expansion and site conversions: you work any offset the exam gives you in the same order, without an app

Vpp. 33-39

Valves

Gate and globe valves in cutaway, ball, plug and butterfly, check valves, relief and safety valves, pressure-reducing stations, control valves and actuators

VIpp. 40-47

Steam Systems

Sensible and latent heat, low- and high-pressure boilers, boiler trim, steam mains and drip legs, trap types and trap stations, condensate, flash steam and water hammer

VIIpp. 48-53

Hydronic and Other Systems

Closed-loop hydronics, pumping away, primary-secondary piping, chilled water and cooling towers, natural gas and propane, compressed air and process lines

VIIIpp. 54-60

Testing, Bolt-Up and Safe Work

Hydrostatic and pneumatic tests, flange faces and gaskets, bolt-up pattern, supports, guides and anchors, rigging and sling angles, lockout, confined space and hot work

IXpp. 61-65

Final Review

Formulas on one page, the most common exam and site mistakes, what to verify for your province and a week-before review plan

At the end of the book: Formulas on one page, the most common exam and site mistakes, what to verify for your province and a week-before review plan.

Plus: 2 Free Books

Exam-Style Practice Questions: Multiple Choice with Answers Explained

BONUS 1: «Exam-Style Practice Questions: Multiple Choice with Answers Explained»

Value on its own: US$ 17.90

Practise in the same multiple-choice format as the exam, by topic, and see in one line why each answer is right or wrong.

Pipefitter Quick Sheets: Formulas, Constants and the 15 Most Common Mistakes

BONUS 2: «Pipefitter Quick Sheets: Formulas, Constants and the 15 Most Common Mistakes»

Value on its own: US$ 14.90

Every offset constant, conversion and formula on a few printable pages, plus the mistakes fitters make most often, drawn before and after.

Steamfitter-Pipefitter Illustrated with 2 Free Books

  • Steamfitter-Pipefitter Illustrated: 65 illustrated pagesUS$ 63
  • BONUS 1: Exam-Style Practice Questions: Multiple Choice with Answers ExplainedUS$ 17.90
  • BONUS 2: Pipefitter Quick Sheets: Formulas, Constants and the 15 Most Common MistakesUS$ 14.90
  • High-resolution PDF to printIncluded
Total value US$ 95.80
YOUR PRICE:
US$ 27
You save US$ 68.80
YES, I WANT STEAMFITTER-PIPEFITTER ILLUSTRATED FOR US$ 27

📄 This is a digital PDF book sent to your email: nothing is printed or shipped.

Secure purchaseEncrypted payment30-day guarantee

PDF by email: We email you Steamfitter-Pipefitter Illustrated as a PDF, together with the two free books. It's a single payment: no installments, no extra charges.

Who This Book Is For

You're in your last apprenticeship period

You're in your last apprenticeship period

Every block of the trade on its own page, in the order the exam covers it, so the module material finally lines up with what you do on site.

Your exam date is booked

Your exam date is booked

Formulas on one page, a week-before review plan and practice questions by topic, so you find the gaps before the day, not during it.

You're challenging as a trade qualifier

You're challenging as a trade qualifier

You already know the work. The book puts it in the exam's language: the iso, the offset math in millimetres, the code concepts, drawn to review on days off or at camp.

Everything You Get Today

US$ 95.80US$ 27
YES, I WANT STEAMFITTER-PIPEFITTER ILLUSTRATED FOR US$ 27

📄 This is a digital PDF book sent to your email: nothing is printed or shipped.

30DAYS
GUARANTEE

30-Day Guarantee

Try Steamfitter-Pipefitter Illustrated for 30 days, bonus books included.

We refund everything if the file won't open, if the book isn't what you see here, if you were charged twice or if the email doesn't arrive. Just email us.

You pay once. No subscriptions.

Frequently Asked Questions

Is it for me if I've been on the tools for years and I'm challenging the exam?

Yes. It doesn't explain what a wrench is. You already have the modules and the videos; what they don't give you is the whole trade in the order the exam covers it, one drawing per topic, in metric and with Canadian codes, with the formulas on one page. You review what you already do and fill the gaps: isos, rolling offsets, steam, testing.

Where does the content come from?

From the Red Seal Occupational Standard for Steamfitter/Pipefitter, the Interprovincial exam breakdown and the codes adopted by the provinces (CSA B51, CSA B149.1, ASME B31.1 and B31.3). Anything that depends on your province or the code edition is marked VERIFY.

Is it official material?

No. It's an independent study guide, not affiliated with or endorsed by Red Seal, any provincial apprenticeship authority, CSA Group or ASME. It doesn't reproduce code text or tables.

Does it replace my apprenticeship training?

No. It's for reviewing and studying. It doesn't give you a certificate or count toward your hours, and it doesn't replace your technical training, your on-the-job hours, the codes adopted in your province or your employer's safety procedures. Your ticket comes from your provincial apprenticeship authority once you pass the exam.

Are the practice questions the ones on the exam?

No. They're written for this book, in the same multiple-choice format, by topic, with each answer explained. They aren't official exam questions.

When and how does it arrive?

The book and the 2 bonus books arrive as PDFs by email, at the address you enter at checkout.

Do I have to pay every month?

No. It's a one-time payment, with no subscription.

Can I have it on paper?

Yes. The PDFs are made to print, at home or at a print shop, so you can take them to camp.

How does the refund work?

You have 30 days. We refund everything if the file won't open, if the book isn't what you see on this page, if you were charged twice or if the email doesn't arrive: just email us.

Before You Close This Page

No more rereading the module and keeping nothing.

The rolling offset: you see it drawn, and that's it.

You walk into the exam knowing where everything is.

Drawings make studying faster.

The book is right below.

One-time payment: US$ 27 · Guarantee: 30 days · PDF by email

YES, I WANT STEAMFITTER-PIPEFITTER ILLUSTRATED FOR US$ 27

📄 This is a digital PDF book sent to your email: nothing is printed or shipped.